Balto® Splint Cat – Carpal/Metatarsal Laxity Splint for Felines
SUPPORTS
- Carpal/Metatarsal Laxity (Hyperextension & Hyperflexion)
- Bone Fractures
- Carpal and Metatarsal Bones
- Carpus (Wrist)/Metatarsus (Hock) Instability
- Arthritis/Arthrosis
DESCRIPTION
For cats, the Balto® Splint Feline is a great way to support their front and back joints of the paw, including the radiocarpal, carpometacarpal, and tarsometatarsal (wrist) joints. This non-neoprene compression and mild fracture support brace allows your cat a comfortable range of motion while keeping their legs stable and supported.
BRACE APPLICATIONS
- Hyperflexion or hyperextension of the carpal and tarsal
- Minor ligament distortions
- Sprains and strains of the tarsus or carpus
- Minor fractures of the tarsus or carpus bones
- Post-surgical support
- This brace can be used on healthy joints, muscles and ligaments to prevent injury and provide structural support.
- Brachial plexus avulsion
BRACE FEATURES
- Single angled airplane aluminum splint that is slightly malleable for a more custom fit.
- Adjustable upper and lower padding straps can be lengthened or shortened on the leg to ensure an excellent fit
Comes in sizes xx-small and x-small. To find the best size for your pet, visit the sizing chart here
Handwashable
Vet approved and preferred
Non-neoprene
Learn How Properly Fit the Balto Splint to Your Cat
All Balto® braces are made from high-quality materials, not neoprene - which has been known to collect bacteria, provide inadequate support, and wear down quickly. A variety of sizes ensure a secure fit. No pinching straps.
For indoor-outdoor cats, please remove the brace prior to going outside.
Recommended for all ages unless otherwise advised by veterinarians. Apply brace for balanced increments of time, if appropriate, for pets under the age of 2 to prevent possible growth disturbances.
Size Chart
| SIZE | WEIGHT | LENGTH |
|---|---|---|
| XX-Small | Up to 5 lbs | 3.5" |
| X-Small | Up to 15 lbs | 5" |
Measurement A: Circumference of the carpus/metatarsus
Measurement B: Height of the brace
| SIZE | WEIGHT | LENGTH |
|---|---|---|
| XX-Small | Up to 2kg | 9.5cm |
| X-Small | Up to 5-7kg | 13cm |
Measurement A: Circumference of the carpus/metatarsus
Measurement B: Height of the brace
Instructions for Use
Step 1
Prepare the brace by opening the straps and position the brace on the metacarpal pad of the leg. The phalanges must be free to move (Fig. 1).
Step 2
Hold the brace firmly against your dog or cat's leg (Fig. 2).
Step 3
Tightly close with the Velcro straps (starting with the top straps). The brace should not be loose or twist on the leg (Fig. 3).
Step 4
Tightly close the bottom strap using the Velcro strap (Fig. 4).
NOTE: It is not necessary for the brace to overlap.
Tips & Tricks
- To prolong the durability of the brace we recommend covering the brace with a shoe or sock.
- Allow up to two weeks for your pet to fully accept the brace
- Wear the brace for 30 minutes a day, increasing 30 minutes each day after, for up to 12 hours
- Consult your veterinarian for specific instructions on when to wear your brace
- Remove the brace when your animal sleeps at night
- Inspect your pet for signs of skin irritation. If any are present, contact your veterinarian
- In addition to wiping the brace clean, keep skin and fur that comes into contact with the brace clean
- Inspect your brace regularly for any damage
CONTACT US
Maintenance & Repair
A clean brace not only prevents infections, irritation, and a stinky smell; but it also allows your brace to last longer. To help support the longevity of your bracing device, here are some of our tips on how to properly clean your orthopedic bracing:
- Remove as much hair as possible from any Velcro® frequently to prevent compaction.
- Use lint roller or lightly adhesive tape to remove hair from the material of the brace.
- By hand, use warm water and a gentle cleansing soap to remove any stains and odors.
- Rinse soap thoroughly from the brace
- Hang to dry. Once the brace is completely dry, it is ready for use!
DESCRIPTION
For cats, the Balto® Splint Feline is a great way to support their front and back joints of the paw, including the radiocarpal, carpometacarpal, and tarsometatarsal (wrist) joints. This non-neoprene compression and mild fracture support brace allows your cat a comfortable range of motion while keeping their legs stable and supported.
BRACE APPLICATIONS
- Hyperflexion or hyperextension of the carpal and tarsal
- Minor ligament distortions
- Sprains and strains of the tarsus or carpus
- Minor fractures of the tarsus or carpus bones
- Post-surgical support
- This brace can be used on healthy joints, muscles and ligaments to prevent injury and provide structural support.
- Brachial plexus avulsion
BRACE FEATURES
- Single angled airplane aluminum splint that is slightly malleable for a more custom fit.
- Adjustable upper and lower padding straps can be lengthened or shortened on the leg to ensure an excellent fit
Comes in sizes xx-small and x-small. To find the best size for your pet, visit the sizing chart here
Handwashable
Vet approved and preferred
Non-neoprene
Learn How Properly Fit the Balto Splint to Your Cat
All Balto® braces are made from high-quality materials, not neoprene - which has been known to collect bacteria, provide inadequate support, and wear down quickly. A variety of sizes ensure a secure fit. No pinching straps.
For indoor-outdoor cats, please remove the brace prior to going outside.
Recommended for all ages unless otherwise advised by veterinarians. Apply brace for balanced increments of time, if appropriate, for pets under the age of 2 to prevent possible growth disturbances.
Size Chart
| SIZE | WEIGHT | LENGTH |
|---|---|---|
| XX-Small | Up to 5 lbs | 3.5" |
| X-Small | Up to 15 lbs | 5" |
Measurement A: Circumference of the carpus/metatarsus
Measurement B: Height of the brace
| SIZE | WEIGHT | LENGTH |
|---|---|---|
| XX-Small | Up to 2kg | 9.5cm |
| X-Small | Up to 5-7kg | 13cm |
Measurement A: Circumference of the carpus/metatarsus
Measurement B: Height of the brace
Instructions for Use
Step 1
Prepare the brace by opening the straps and position the brace on the metacarpal pad of the leg. The phalanges must be free to move (Fig. 1).
Step 2
Hold the brace firmly against your dog or cat's leg (Fig. 2).
Step 3
Tightly close with the Velcro straps (starting with the top straps). The brace should not be loose or twist on the leg (Fig. 3).
Step 4
Tightly close the bottom strap using the Velcro strap (Fig. 4).
NOTE: It is not necessary for the brace to overlap.
- To prolong the durability of the brace we recommend covering the brace with a shoe or sock.
- Allow up to two weeks for your pet to fully accept the brace
- Wear the brace for 30 minutes a day, increasing 30 minutes each day after, for up to 12 hours
- Consult your veterinarian for specific instructions on when to wear your brace
- Remove the brace when your animal sleeps at night
- Inspect your pet for signs of skin irritation. If any are present, contact your veterinarian
- In addition to wiping the brace clean, keep skin and fur that comes into contact with the brace clean
- Inspect your brace regularly for any damage
A clean brace not only prevents infections, irritation, and a stinky smell; but it also allows your brace to last longer. To help support the longevity of your bracing device, here are some of our tips on how to properly clean your orthopedic bracing:
- Remove as much hair as possible from any Velcro® frequently to prevent compaction.
- Use lint roller or lightly adhesive tape to remove hair from the material of the brace.
- By hand, use warm water and a gentle cleansing soap to remove any stains and odors.
- Rinse soap thoroughly from the brace
- Hang to dry. Once the brace is completely dry, it is ready for use!